Search:
		Get A Quote

	OS-CON - SVP Series	Please download this utility to help select the most suitable capacitor (right-click and save as).
	SVP Series   Datasheet Brochure The SVP series is the standard SMD series product. Suitable for switch mode power supplies. Lead-free re-flow is supported.
	Specifications
	Items Conditions Characteristics Category temperature range --- -55°C to +105°C Tolerance on rated capacitance 120Hz M : ±20% Tangent of loss angle 120Hz less than or equal to the value of Table 7 Leakage current     *1 After 2 minutes less than or equal to the value of Table 7 ESR --- less than or equal to the value of Table 7 Characteristics of impedence ratio at high & low temp Based on the value at 100kHz, +20°C -55°C Z ⁄ Z 20°C 0.75 to 1.25 +105°C Z ⁄ Z 20°C 0.75 to 1.25 Endurance 105°C, 2,000h, Rated voltage applied (25V−>20V applied) ΔC ⁄ C Within ±20% tanδ 1.5 times or less than initial standard ESR 1.5 times or less than initial standard Leakage current Below an initial standard Damp heat (Steady state) 60°C, 90 to 95% RH, 1,000h, No voltage applied ΔC ⁄ C Within ±20% tanδ 1.5 times or less than initial standard ESR 1.5 times or less than initial standard Leakage current Below an initial standard (after V processing) Resistance to soldering heat     *2 (VPS) (230°C X 75s) ΔC ⁄ C Within ±10% tanδ 1.3 times or less than initial standard ESR 1.3 times or less than initial standard Leakage current Below an initial standard (after V processing)
	*1 When measured values are questionable, measure after applying rated voltage for 2.5-20V products, or 20V for 25V products for 120 minutes at 105°C. *2 Refer to p14-15 of brochure for reflow soldering conditions.
	Marking and Dimension (unit: mm)
	Size Code ΦD±0.5 L +0.1 -0.4 W ±0.2 H ±0.2 C ±0.2 R P ±0.2 A5 4.0 5.4 4.3 4.3 5.0 0.6 to 0.8 1.0 B6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 E12 8.0 11.9 8.3 8.3 9.0 0.6 to 0.8 3.2 F12 10.0 12.6 10.3 10.3 11.0 0.6 to 0.8 4.6
	Size List
	RV : Rated Voltage (SV) : Surge Voltage (room temperature) µF RV (SV) 2.5 (3.3) 4.0 (5.2) 6.3 (8.2) 10.0 (11.5) 16.0 (18.4) 20.0 (23.0) 25.0 (25.0) 3.3         A5     4.7       A5       6.8       A5     C6 10       A5   B6 E7 15       A5 B6     22     A5   B6 C6 F8 27           C6   33   A5   B6   E7 E12 39   B6     C6     47     B6 C6   E7   56       C6 E7 F8 F12 68   B6       F8   82     C6   E7     100     C6   F8 E12   120     C6 E7       150   C6,E7   E7,F8 F8 F12   180         F8,E12     220 C6   E7,F8         270       F8       330   E7 F8 F8,E12 F12     470     F8,E12         560   E12   F12       680 E12 F8           820     F12         1200   F12           1500 F12
	Table 7 SVP Series Characteristics List
	Size Code Part Number *1 Rated Voltage (V) Rated Capacitance (µF) ESR 100kHz to 300kHz (mΩ) (max) Rated ripple current (mArms) Tangent of loss angle (max) Leakage current (µA) (max) *2 A5 16SVP3R3M 10SVP4R7M 10SVP6R8M 10SVP10M 10SVP15M 6SVP22M 4SVP33M 16 10 10 10 10 6.3 4 3.3 4.7 6.8 10 15 22 33 260 240 240 220 200 200 200 660 670 670 700 740 740 740 0.07 0.08 0.09 0.10 0.10 0.12 0.15 26.4 23.5 34.0 50.0 75.0 69.3 66.0 B6 20SVP10M 16SVP15M 16SVP22M 10SVP33M 6SVP47M 4SVP39M 4SVP68M 20 16 16 10 6.3 4 4 10 15 22 33 47 39 68 120 120 90 70 70 70 60 1020 1020 1060 1100 1100 1100 1400 0.10 0.10 0.10 0.12 0.12 0.12 0.12 100 120 176 165 148 78 136 C6   25SVP6R8M  *3 20SVP22M 20SVP27M 16SVP39M 10SVP47M 10SVP56M 6SVP82M 6SVP100M 6SVP120MV 4SVP150MX 2R5SVP220M 25 20 20 16 10 10 6.3 6.3 6.3 4 2.5 6.8 22 27 39 47 56 82 100 120 150 220 80 60 60 50 50 45 45 40 17 40 23 1200 1450 1450 1620 1620 1700 1700 1810 2780 1810 2390 0.10 0.10 0.10 0.10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 85 88 108 125 94 112 103 126 151 120 110 E7   25SVP10M  *3 20SVP33M 20SVP47M 16SVP56M 16SVP82M 10SVP120M 10SVP150MX 6SVP220MX 4SVP150M 4SVP330M 25 20 20 16 16 10 10 6.3 4 4 10 33 47 56 82 120 150 220 150 330 60 45 45 45 40 35 35 35 35 35 1500 1890 1890 1890 2120 2560 2560 2560 2560 2560 0.10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 125 132 188 179 262 240 300 277 120 264 F8   25SVP22M  *3 20SVP56M 20SVP68M 16SVP100M 16SVP150M 16SVP180MX 10SVP150M 10SVP270M 10SVP330MX 6SVP220M 6SVP330M 6SVP470MX 4SVP680M 25 20 20 16 16 16 10 10 10 6.3 6.3 6.3 4 22 56 68 100 150 180 150 270 330 220 330 470 680 50 40 40 35 30 30 30 25 25 25 25 25 25 2000 2400 2400 2670 3020 3020 3020 3700 3700 3700 3700 3700 3700 0.10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 275 224 272 320 480 576 300 540 660 277 416 592 544 E12   25SVP33M  *3 20SVP100M 16SVP180M 10SVP330M 6SVP470M 4SVP560M 2R5SVP680M 25 20 16 10 6.3 4 2.5 33 100 180 330 470 560 680 30 24 20 17 15 13 13 2980 3320 3640 3950 4210 4520 4520 0.12 0.15 0.15 0.15 0.15 0.15 0.15 413 400 576 660 592 448 340 F12   25SVP56M  *3 20SVP150M 16SVP330M 10SVP560M 6SVP820M 4SVP1200M 2R5SVP1500M 25 20 16 10 6.3 4 2.5 56 150 330 560 820 1200 1500 28 20 16 13 12 12 12 3800 4320 4720 5230 5440 5440 5440 0.12 0.15 0.15 0.15 0.15 0.18 0.18 700 600 792 840 775 960 750 *1 Capacitance tolerance : M ±20% *2 After 2 minutes *3 The surge voltage of 25V products is 25V. Please consider SVPD series 25V products (surge voltage is 29V)
	Recommended land pattern dimension of PWB
	(unit : mm) Size Code a b c A5 1.0 6.2 1.6 B6 1.4 7.4 1.6 C6 2.1 9.1 1.6 E7 2.8 11.1 1.9 F8 4.3 13.1 1.9 E12 2.8 11.1 1.9 F12 4.3 13.1 1.9
	Frequency coefficient for ripple current
	Frequency 120Hz ≤ f < 1kHz 1kHz ≤ f < 10kHz 10kHz ≤ f < 100kHz 100kHz ≤ f < 500kHz Coefficient 0.05 0.3 0.7 1

The contents of this webpage are © Semicom Visual 2007−2010. All Right Reserved. Online Disclaimer | Sitemap | Webdesign Doug Plummer

Semicom Visual Ltd. Kao Hockham Building, Edinburgh Way, Harlow, Essex, CM20 2NQ
Tel: +44 (0) 1279 422 224 Fax: +44 (0) 1279 433 339

Semicom Visual Ltd are registered in England, Company Number: 4789158. Registered Office: 10-12 Mulberry Green, Old Harlow, Essex, CM17 0ET.